Unit Display and Operation Selector
REMOTE CONTROL
receiver
This section picks up infrared signals from the remote control
unit (transmitter).
Operation selector
ON position
This position is for operating the air conditioner with the
wireless remote control unit.
Set the selector normally in this position.
OFF position
Switch the selector to the OFF position if you are not going to
use the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
TEST position
This position is used only when servicing the air conditioner.
CAUTION
Do not set at the TEST position for normal operation.
OPERATION lamp
This lamp lights when the system is in the continuous DRY and
COOL mode.
TIMER lamp
This lamp lights when the system is being controlled by the
timer.
OPERATION
TIMER
ON
OFF
TEST
STANDBY
OPERATION lamp
STANDBY lamp
Operation selector
REMOTE CONTROL receiver
INDOOR UNIT
TIMER lamp
IMPORTANT
Avoid using radio equipment
such as mobile phone near
(within 1 m) the indoor unit.
Some radio equipment may
cause malfunction of the unit.
If the trouble happens, dis-
connect power and restart the
air conditioner after a few
minutes.
6
OI-858-06EG