manualshive.com logo in svg

Technibel GRV129R5VAA, Technical Data & Service Manual, Page: 66 / 103

Share
Download
Technibel GRV129R5VAA Technical Data & Service Manual Download Page 66

10-2-3. Only outdoor unit does not run.

A. Check setting temperature.

B. Check PCB Ass'y in either indoor or outdoor unit.

10-2-4. Only Indoor unit does not run.

• Indoor PCB Ass'y is defective.

• Indoor PCB Ass'y is defective.

• Check voltage between terminals

No. 1(+) and No. 2 at the terminal 
plate.

(DC 24V)

No voltage appears.

• Outdoor PCB Ass'y is defective.

OK

OK

NO

Is room temperature too low ?

Try to lower setting temperature by 
temperature setting button (     button).

Outdoor unit still does 
not run.

Remote control unit is defective.

• Try to run using another remote 

control unit.

COOL 

OK

NO

Is room temperature too high ?

Try to raise setting temperature by 
temperature setting button (     button).

Outdoor unit still does 
not run.

• Try to run using another remote 

control unit.

HEAT

Remote control unit is defective.

62

Summary of Contents for GRV129R5VAA








































































































Reviews:

No comments