Operation with the Remote
Control Unit
1. Automatic Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
Once
mode is selected and the unit is preset by following the steps
below, you can have the air conditioner automatically bring the room to
the desired temperature simply by pressing the ON/OFF operation
button.
STEP 1
Press the MODE selector to
.
STEP 2
Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
NOTE
•
To change the temperature setting, press the temperature setting
buttons and change the setting to the desired temperature.
The
indicates the upper limit for the temperature setting and the
indicates the lower limit.
•
Although the fan speed is set automatically, you can change the fan
speed by pressing the FAN SPEED button.
ON I /OFF
1HR.
TIMER
TEMP.
MODE
FLAP
FAN SPEED
SELECT
HH
TIMER
SELECT
MM
TIME SET
NIGHT
SETBACK
BATTERIES
ACL
A/C
SENSOR
OFF ON
CLOCK
HR.
C
SET TEMP
1
AIR CONDITIONER
A
A
STEP 1
STEP 2
12
OI-858-12EG
