Technalogix TAUD-100 Operating Manual Download Page 38

Page: 38 / 97

Technalogix Ltd

Adrenaline Control System

VI-12

Date and Time. Displays current date and time. Power amplifiers ship from

factory with default Mountain Standard Time (MST). Users can adjust this info

from the Date and Time Screen. The event recorder pulls this info when it logs an

event so the user can correlate events in the field. Events stored prior to a date

and/or time change will maintain their original event stamp and will not be

modified to reflect the change. A Real Time Clock holds time for about one week

without AC power.

Carrier ON/OFF switch. By pressing the toggle switch on the touchscreen, the

user

can turn on or off the RF carrier. The same result occurs by turning on or off

the system via the web or SNMP interface, or through controlling of the Remote

Port. A quick beep from the on-board buzzer signifies that the response has been

taken. The power supplies and fan will remain active while the carrier is turned

off via this switch.

Summary of Contents for TAUD-100


































































































Search results

Summary of Contents for TAUD-100

Reviews:

Related manuals for TAUD-100

Brands by name

Popular brands

Technalogix TAUD-100, Operating Manual

Search results

Summary of Contents for TAUD-100

Reviews:

Related manuals for TAUD-100

Brands by name

Popular brands