Technalogix TAUD-100, Operating Manual

Page: 29 / 97

MEAN WELL
SWITCHING POWER SUPPLY
ISO-9001 CERTIFIED MANUFACTURER
S-60
SERIES
.
LOW COST, HIGH RELIABILITY
.
COMPACT SIZE, LIGHT WEIGHT
.
105
º
C OUTPUT CAPACITOR
.
100% FULL LOAD BURN-IN TEST
.
INTERNATIONAL AC INPUT RANGE
.
BUILT IN EMI FILTER, LOW RIPPLE NOISE
.
HIGH EFFICIENCY, LOW WORKING TEMPERATURE
.
SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT
.
SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED
MODEL
SPECIFICATION
S-60-5 S-60-12 S-60-15 S-60-24
DC OUTPUT VOLTAGE 5V 12V 15V 24V
OUTPUT V. TOLERANCE ±2% ±1% ±1% ±1%
OUTPUT RATED CURRENT 12A 5A 4A 2.5A
OUTPUT CURRENT RANGE 0-12A 0-5A 0-4A 0-2.5A
RIPPLE & NOISE 120mVp-p 120mVp-p 150mVp-p 150mVp-p
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1% ±0.5% ±0.5% ±0.5%
DC OUTPUT POWER 60W 60W 60W 60W
EFFICIENCY 73% 76% 77% 79%
DC VOLTAGE ADJ. +10,-5% ±10% ±10% ±10%
INPUT VOLTAGE RANGE 85
~
264VAC 47
~
63Hz; 120
~
370VDC
AC CURRENT 2A/115V 1A/230V
INRUSH CURRENT COLD START 30A/115V 60A/230V
LEAKAGE CURRENT <3.5mA/240VAC
OVERLOAD PROTECTION 105%
~
150% TYPE:PULSING HICCUP SHUTDOWN RESET:AUTO RECOVERY
OVER VOLTAGE PROTECTION 115%
~
135%
OVER TEMP. PROTECTION ----------
TEMP. COEFFICIENT ±0.03% /
º
C (0
~
50
º
C)
SETUP, RISE, HOLD UP TIME 800ms, 50ms, 10ms / 115VAC 300ms, 50ms, 80ms / 230VAC
VIBRATION 10
~
500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
WORKING TEMP., HUMIDITY -10
º
C
~
+60
º
C(REFER TO OUTPUT DERATING CURVE), 20%
~
90% RH
STORAGE TEMP., HUMIDITY -20
º
C
~
+85
º
C, 10%
~
95% RH
DIMENSION 159
*
97
*
38mm CASE:901
WEIGHT 0.55Kgs
SAFETY STANDARDS UL1012, TUV EN60950, IEC950, UL1950 APPROVED
EMC STANDARDS CISPR22 (EN55022), IEC801-2,3,4, IEC555-2 VERIFICATION
NOTE
:
1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25
º
C
70% RH. AMBIENT.
2.TOLERANCE
G
INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION.
3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR.
4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD.
5.LOAD REGULATION IS MEASURED FROM 0% TO 100% RATED LOAD.
6.C2,3,6 MUST BE REMOVED.
2000-10-03