Version 12.11.2013 TEC-6050-2
CANTEC-F2 V5
P
a
g
e
12
CAN-bus
6
Output (-) pin 5
1-24/22
7
Output (+) pin 6
1-24/21
8
Output (+) pin 7
1-24/11
9
Output (-) pin 13
1-24/1
10 Output (-) pin 14
1-24/8
11 Output (-) pin 15
1-24/8
12 Output (-) pin 16
1-24/8
The setting range 1-24 in table 3, equals the available programmable output functions from
table 4.
Output functions no. 8, 10 and 15 have sub-settings for which the sub-sequences to chapter
4.2. are also described in table 4.
Available programmable output functions – table 4
no.
Function
Function description
1
Security
Constant level signal while the unit is in Secure mode.
2
Arming impulse
0.8 sec long impulse when the unit is armed.
3
Disarming
impulse
0.8 sec long impulse when the unit is disarmed.
4
Trunk opening
via original
remote control
impulse
0.8 sec long impulse on trunk opening command of original remote
control.
5
Original alarm
system panic
Constant level signal while original alarm system (if one is installed)
is in alert mode.
6
Siren panic
30 sec long constant level signal when one of the zones is triggered
in security mode: trunk, doors, hood opening. This function can be
used in vehicles that are not equipped with an original alarm
system. The signal stops when the vehicle leaves security mode.
7
Panic on horn
from external
Impulse signal while there is an input signal on a programmable
input which is defined as horn control.
