TEAMWELDER Plasma CUT 105, User Manual

Page: 19 / 64

User manual 19
Power cable
Use an extension line that national or local codes to be certified. The extension must be installed
by a licensed electrician. See the length requirements listed below.
Note: the unit was tested with a power cable 3 m for compliance with EMC standard EN50199.
Three phase power cable
CE models CUT 65 -105 come with power cord 4 mm2, 4 wires (3 phases plus ground).
CE models CUT 125 come with power cord 6 mm2, 4 wires (3 phases plus ground).
To operate the CUT 65 -125, use a plug that complies with national and local codes. A licensed
and qualified electrician should connect the power cord to the plug.
Installation power cable
1.
Strip and prepare the power cables as shown below:
Unit CE
L1 Black(U) R
L2 Brown(V) S
L3 Grey(W) T
Hearth Green-Yellow