User manual 6
IMPORTANT WARNING
According to the European standard EN61000-3-
12, which entered into force in December 2010, this
equipment is suitable for use with self-generating
power and private power networks. Its use in elec-
tric networks of public character does not conform
to the limits prescribed in the standard.
ELECTRIC SHOCK CAN KILL
Touching electrical parts could cause a
fatal shock or severe burns.
• Don’t touch the life electric parts.
• Wear dry insulated gloves, shoes and
protective clothing.
• Insulate yourself from work and ground using
dry insulating material and
non-flammable.
• The working area should be clean and dry.
• Switch OFF the machine for cleaning and
maintenance operations.
• Do not rape cables around your body.
• Turn OFF the machine when remain not used.
• Periodically check the supply hose, the
insulation must be intact. Replace the
hose immediately if damaged. Use the
machine with bare wires, uncoated, is
very dangerous.
• Before handling the cutting power
source must wait five minutes to ensure
complete discharge of the capacitors of
the machine.
• Keep your unit in good condition; repair
or replace damaged parts immediately.
Maintain unit according to manual.
CUTTING CAN CAUSE FIRE OR
EXPLOSION
Fire prevention
• Keep flammable items away from the
work area.
• Make sure the work area is a fire extinguisher,
and that it is in top condition for use.
• Ventilate the work area before using the slicer
when working in areas of potential fire risk.
Explosion prevention
• Do not cut in areas containing explosives,
flammable gases or vapours.
• Do not locate unit on, over, or near combustible
surfaces.
• Do not operate the machine in areas with an
atmosphere containing high concentrations of
dust, flammable gases or vapours.
• Never use the machine for cutting container of
flammable materials that
are not completely empty and clean, or
are under pressure.
SMOKE AND GASES CAN BE
HAZARDOUS
Induction heating of certain materials,
adhesives, and fluxes may cause fumes or
smoke.
Breathing these fumes and gases can be
hazardous to your health.
• Keep your head out of the smoke, do not
breathe the fumes.
• If inside, ventilate the area and / or us
an exhaust system near the cutting arc
to remove the smoke and gas cutting.
• If ventilation is poor, wear an approved
air-supplied respirator.
• Work in a confined space only if it is
well ventilated, or while wearing an
air-supplied respirator. The smoke and
gases from the heating process can
displace air and lower the oxygen level
causing injury or death. Be sure the
breathing air is safe.
NOISE CAN DAMAGE HEARING
Prolonged noise from some applications can
cause hearing damage.
•
Use hearing protection or ear muffs if
nose level is high.
•
Warn others about the dangers of noise.
Summary of Contents for Plasma CUT 105
