TEAMWELDER Plasma CUT 105, User Manual

Page: 17 / 64

User manual 17
Power source location
Place the plasma power source CUT 65 -125 with a minimum distance of 0.5m of space (both
front and back) to receive of the fan, for good ventilation.
Mains power connection
The CUT 65 -125 is a plasma generator capable of cutting at 380-400 Vac three phase. Use a
line disconnect breaker for each power input so that the operator can turn off the power supply
quickly in an emergency. Place the back of the machine with the switch so that it is easily
accessible to the operator. For a continious working, the operator must connect the machine
to a „Wall power breaker“ which is equal or over the level of consumption of the plasma power
source.