TEAMWELDER Plasma CUT 105, User Manual

Page: 50 / 64

User manual 50
MAINTENANCE
WARNING
ELECTRIC SHOCK CAN KILL THE
Disconnect electrical power before servicing. A
trained technician should do any work that re-
quires removing the cover of the power supply.
Each time it is used Check the gas pressure. Ensure that consumables are
installed properly and are not
worn.
Each week
Examine and check the safety switch for the cap: note the
red fault light and yellow light of the holding cap of the
torch, which illuminate when the cap is loose.
Every 3 months Replace damage labels Check pressure hose, filter
element, and connections for
leaks that.
Replace the cable or the
mains plug if they were
damaged.
Replace the torch cable if
damaged.
Replace damage labels
Every 6 months Clean the inside of the power
source with compressed air
or vacuuming.
Routine maintenance