97
31
30
32
29
46
134
30
142
81
100
LARGE HOLES
FORWARD
81
117
117
32
31
Step C-1
Step C-2
q
1. Thread a 3/16" Ball Stud (81), from the top side, into each of the
Left (30) and Right (31) Bellcranks.
q
2. Insert a 5mm x 8mm Bearing (117) into the top and bottom of
the Left and Right Bellcranks.
q
3. Thread a 3/16" Ball Stud (81) into the small hole in the Draglink
(32).
q
4. Insert the 2 Carrier/Steering Bushings (100), into the bottom
side of the Draglink and then rest it on the top of the Left and Right
Bellcranks.
q
5. Thread a 4-40 x 3/8" Button Head Screw (142) through each
Steering Bushing and into the Bellcranks.
Figure 28
Figure 29
BAG C
12
q
1. Line up the hex of a Steering Post (97) with the rear hex area on
left side of the Chassis (46). Press the Steering Post to the bottom of
the hex. Thread a 4-40 x 3/8" Flat Head Screw (134) through the bot-
tom of the Chassis and into the Steering Post.
q
2. Repeat Step 1 for the right side Steering Post.
q
3. Slide the Bellcrank assembly from Step C-1 through the Steer-
ing Tunnel (29) and then slide the Left Bellcrank (30) over the Steer-
ing Post on the left side of the Chassis.
q
4. Sliding the Right Bellcrank (31) over the right Steering Post will
need to be done at the same time as the Left Bellcrank.
The Bellcranks should rotate freely.
81
142
Steering Bellcrank Assembly:
Steering Install:
134
117
