same way also at the other side. Use your other thumb to
prevent an unintentional lock-in of the front panel at the other
side. Now you can lift off the front panel from the unit’s body.
Now place the new front panel onto the unit. Then press
slightly onto the front panel near the socket for the external
earphone-microphone and in the area of the two charging
contacts at the bottom until it locks in. The new front panel
must lie correctly on the unit’s body now.
3) Switching On/Off
Depress the confirmation and On/Off key ( 5 ) for about 1
or 2 seconds to switch the transceiver on. A short receipt
tone sounds from the loudspeaker ( 6 ) and the display illu-
mination lights up in blue. In a short self test the graphic dis-
play ( 3 ) shows all points. Now the unit is either in PMR
reception mode or in LPD reception mode. The display will
show the main screen which indicates also the actual band.
To switch the unit off depress the confirmation and On/Off
key ( 5 ) again for about 1 or 2 seconds. The loudspeaker
gives a short tone and all symbols disappear from the dis-
play. The last settings remain memorised, even if the batte-
ries are removed.
Note: The On/Off operation of the confirmation and On/Off
key ( 5 ) is disabled when it is used for confirmation. This
factory setting has been made to avoid an unwanted swit-
ching Off of the unit. The disabling of the On/Off function will
be cancelled after the key ( 5 ) is released once for a short
time.
4) LCD illumination
The LC display backlight is switched on at every pressure on
any key, and it will be automatically shut off 8 seconds after
the last key entry.
5) Key lock function
The key lock function is activated from the main screen. The
unit can be either in PMR mode or in LPD mode. Depress
and hold the confirmation key ( 5 ). While you hold this key,
press also the Up key
▲
( 4 ). Then two short confirmation
tones sound from the speaker ( 6 ), and the key symbol
( position C ) appears in the display. Now all keys except
the PTT key ( 9 ) are ignored. The speaker gives two short
tones at every pressure on any locked key, except the con-
firmation key ( 5 ).
To stop the key lock function depress and hold the confirma-
tion key ( 5 ). While you hold this key, press also the Up key
▲
( 4 ). Then one single short confirmation tone sounds from
the speaker, and the key symbol disappears from the display.
Now all keys are unlocked again.
6) Automatic abortion of functions
If you select a function in the main menu, you have to insert
all necessary entries within 5 seconds, otherwise the func-
tion will be aborted and not executed. Instead the display
returns to the main screen.
7) Up
▲
and Down
▼
keys
If you depress briefly the keys Up
▲
and Down
▼
( 4 ), the
corresponding values ( volume, channel, etc. ) are changed
for one step up or down. If you hold these keys for 1 or 2
seconds, the values change quickly into the corresponding
direction. Some values run in a ring like system, others
remain constantly after they have reached the highest or
lowest value. In this case you will hear from the speaker a tri-
ple confirmation tone.
8) Socket for external earphone-microphone
The socket ( 2 ) ( ø 2.5 mm ) on the top side of the unit can
be used to connect an external earphone-microphone, i.e.
English
English
24
25
Manual_UHF-Handy 18.07.2003 16:53 Uhr Seite 24
