Elevon horns and control link
On the elevons, cut through the yellow film to open the pre-routed slot for the elevon horns. Add a decent
amount of CA/superglue to the horn and in the slot, insert the horn and make sure it is perpendicular to
the elevon and in-line with the servo horn.
Elevon servos
Add a band of masking tape or shrink tube around the servo. Attach the servo horn to the servo and put
the control link on the inner most hole for optimal mechanical range (resolution). Put a blob of hot glue or
CA glue in the corners of the servo compartment and install the servo.
17
