Video transmitter
The video transmitter should preferably be installed the right side of the wing, next to the electronics bay.
If the bay is too small, outline the VTx and use a utility knife to remove the excessive foam. Mount the VTx
and support antenna portion of the unit using hot-glue to prevent dislodging the RF connector on impact.
Use the supplied adhesive cover to improve the aerodynamics and to protect the VTX.
Pilot camera
On the right side of the wing is a specially designed “pod” which houses the pilot camera. Any standard
26x26mm camera will fit, like the TBS ZEROZERO or RunCam Swift cameras. To fit the TBS69, make small
cuts in the back to remove foam or detach the heatsink. When using the stock mold, it is recommended to
use a 28mm or narrower lens for a better view (to keep the frame out of the view).
OSD (On Screen Display)
You can use an optional but recommended OSD add-on to get live readout on screen about the battery
voltage (V), current draw (A), total current consumption (mAh), receiver signal strength (%) and flight time
(minutes:seconds). This gives an essential overview of the system vitals while in flight. For a basic feature
set we recommend the TBS FPVision which provide all but the mentioned data points. For full featured
GPS-enabled system, check out the TBS CORE PRO with optional TBS GPS and TBS BLACKBOX logger.
24
