vi
Safety Information
Some Do
’
s And Don
’
ts On the Safe Use Of Equipment
This equipment has been designed and manufactured to meet international safety standards but,
like any electrical equipment, care must be taken if you are to obtain the best results and safety
is to be assured.
DO
read the operating instructions before you attempt to use the equipment.
DO
ensure that all electrical connections (including the mains plug, extension leads and inter-
connections between the pieces of equipment) are properly made and in accordance with the
manufacturer
’
s instructions. Switch off and withdraw the mains plug before making or changing
connections.
DO
consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
DON
’
T
remove any fixed cover as this may expose dangerous voltages.
Overheating will cause damage and shorten the life of the equipment.
DON
’
T
allow electrical equipment to be exposed to dripping or splashing, or objects filled with
liquids, such as vases, to be placed on the equipment.
DON
’
T
place hot objects or naked flame sources such as lighted candles or nightlights on, or
close to equipment. High temperatures can melt plastic and lead to fires.
DON
’
T
use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety.
DON
’
T
listen to headphones at high volume, as such use can permanently damage your
hearing.
DON
’
T
leave equipment switched on when it is unattended unless it is specifically stated that it
is designed for unattended operation. Switch off using the switch on the equipment and make
sure that your family knows how to do this. Special arrangements may need to be made for
infirm or handicapped people.
DON
’
T
continue to operate the equipment if you are in any doubt about if it
’
s working normally
or if it
’
s damaged in any way. Switch it off and withdraw the mains plug and consult your dealer.
ESD Remark
: In case of malfunction due to electrostatic discharge just reset the product
(reconnection of power source may be required) to resume normal operation.
NOTE
: Do not open any covers and do not repair yourself. Qualified personnel must carry out
repair work.
