background image

409-10095 

Rev 

H

 

of 12

 

SAFETY PRECAUTIONS — READ THIS FIRST! 

IMPORTANT SAFETY INFORMATION 

NOTE 

Keep all decals clean and legible, and replace them 

when necessary. 

 

DANGER 

ELECTRIC SHOCK HAZARD 

 

This tool is not insulated. When using this unit near 

energized electrical lines, use proper personal protective 

equipment. 
Failure to observe this warning could result in severe 

injury or death.  

 

DANGER 

SKIN INJECTION HAZARD 

 

Do not use hands to check for oil leaks. Highly 

pressurized oil will puncture the skin causing serious 

injury, gangrene, or death. If injured, seek medical help 

immediately to remove the oil.  

 

DANGER 

FIRE HAZARD 

 

Do not use solvents or flammable liquids to clean the 

crimping tool. Solvents or flammable liquids could ignite 

and cause serious injury or property damage. 
Failure to heed these warnings could result in severe 

injury from harmful fumes or burns from flying debris. 

 

DANGER 

FIRE HAZARD 

 

Do not dispose of batteries in a fire. They will vent 

fumes and will explode. Instead, dispose of batteries in 

an environmentally responsible manner or send the 

battery back to TE.  

 

DANGER 

Inspect the tool and jaws/dies before each use. Replace 

any worn or damaged parts. A damaged or improperly 

assembled tool can break and strike nearby personnel. 
Failure to observe this warning could result in severe 

injury or death. 

 

CAUTION 

— Do not place the tool in a vise. The crimping tool is 

designed for hand-held operation. 
— Protect the crimping tool from rain and moisture. 

Water will damage the crimping tool and battery. 
Failure to observe these precautions may result in injury 

or property damage. 

 

CAUTION 

— Do not allow anything to contact the battery 

terminals. 
— Do not immerse the batteries in liquid. Liquid may 

create a short circuit and damage the battery. If the 

batteries are immersed, contact your service center for 

proper handling. 
— Do not place the battery into a pocket, tool pouch, or 

tool box with conductive objects. Conductive objects 

may create a short circuit and damage the battery. 
— Do not place a battery on moist ground or grass. 

Moisture may create a short circuit and damage the 

battery. 
Failure to observe these precautions may result in injury 

or property damage. 

 

CAUTION 

— Do not store the battery at more than 60°C [140°F]. 

Damage to the battery can result. 
— Do not use another manufacturer’s charger. 
— Do not attempt to open the battery. It contains no 

user-serviceable parts. 
Failure to observe these precautions may result in injury 

or property damage.  

 

CAUTION 

— Do not perform any service or maintenance other 

than as described in this manual. Injury or damage to 

the tool may result. 
Failure to observe these precautions may result in injury 

or property damage.  

 

Summary of Contents for 2031400-1













Reviews: