409-10095
Rev
H
7
of 12
2.
SPECIFICATIONS
CRIMPING CAPACITIES
PART NUMBER
2031400-1, -4, -11, -21, -31, -41
2031400-5, -15, -25, -35, -45
Rated Crimping Force
15.6 kN [3500 lb] Max
8.5 kN [1900 lb] Max
Oil Pressure
276 bar [4000 psi]
247 bar [3600 psi] Max
Crimping Time
4 Seconds Approx.
3 Seconds Approx.
Crimps per Charge
250 Approx.
250 Approx.
CRIMPING TOOL
Length
†
240 mm [9.4 in.]
240 mm [9.4 in.]
Width
†
59 mm [2.3 in.]
59 mm [2.3 in.]
Depth
†
48 mm [1.9 in.]
48 mm [1.9 in.]
Weight
†
0.6 kg [1.4 lb]
0.6 kg [1.4 lb]
Vibration
†
<2.5 m/s
2
<2.5 m/s2
POWER UNIT (With Battery Installed)
Length
248 mm [9.8 in.]
248 mm [9.8 in.]
Width
80 mm [3.1 in.]
80 mm [3.1 in.]
Depth
142 mm [5.6 in.]
142 mm [5.6 in.]
Weight
2.0 kg [4.3 lb]
2.0 kg [4.3 lb]
Sound Level
72 dBA
72 dBA
Hydraulic Oil (
Petro-Canada Hydrex MV Arctic 15
)
48 g [1.7 oz]
48 g [1.7 oz]
Battery Voltage (Lithium Ion)
10.8 VDC
10.8 VDC
Charging Time
25 Minutes Approx.
25 Minutes Approx.
OPTIONAL ACCESSORIES
PART NUMBER
4-Point Harness (Requires Padded Belt)
2063864-1
2063864-1
Padded Belt
2063863-1
2063863-1
Li-ion Battery (Included in Kit)
2031440-1
2031440-1
Bench Mount Assembly
2031403-1
2031403-1
Carrying Case with Shoulder Strap (Included in Kit)
2031489-1
2031489-1
†Depends on the specific crimp tooling head installed.
3.
RECEIVING/INSPECTION
The Electro-Hydraulic Hand Tool Kit 2031400-[ ] is thoroughly inspected during and after assembly. Prior to
packaging and shipping, a final series of tests and inspections is made to ensure proper function of the tool.
The following inspection should be performed as a safeguard against potential problems generated in transit.
1. In a well-lighted area, carefully uncrate the tool and inspect each component as it is removed from the
packaging.
2. Thoroughly inspect each component for evidence of damage that may have occurred in transit. If any
of the components are damaged, file a claim against the carrier and notify TE Connectivity
immediately.
3. Keep this manual and all drawings with the tool for the benefit of operation and maintenance
personnel.
The Electro-Hydraulic tool should be inspected at regularly scheduled intervals, depending on care, degree of
operator skill, the type and size of product being crimped, and environmental conditions.
