409-10095
Rev
H
6
of 12
1.
INTRODUCTION
The Electro-Hydraulic Hand Tool kit 2031400-[ ] consists of the Electro-Hydraulic Hand Tool, one rechargeable
battery cartridge (2031440-[ ]), a battery charger (2031441-[ ]) and a carrying case. To use the tool without a
battery, an optional AC to DC power adapter (2031443-[ ]) is available. These assemblies are listed in the table
in Figure 1.
The Electro-Hydraulic Hand Tool is designed to accept interchangeable head assemblies which accept
interchangeable SDE die sets used for crimping various types of electrical wire connectors. Head assemblies
and die sets are not included in this kit and must be ordered separately.
NOTE
The tool should ONLY be used by trained, competent operators.
This manual contains NOTE, CAUTION, and DANGER, and WARNING statements.
NOTE
Highlights special or important information.
CAUTION
Denotes a condition which may result in product or equipment damage.
DANGER
“Dangers” and “Warnings” denote an imminent hazard which may result in moderate or severe injury.
Refer to the 124 series document (
) for General Power Tool Safety Warnings.
NOTE
Dimensions in these instruction are in millimeters [with inch equivalents provided in brackets.] Figures are for reference only
and are not drawn to scale.
For tooling assistance (or service information),
call the PRODUCT INFORMATION number at: 1.800.522-6752.
