TE Connectivity Confidential & Proprietary. Do not reproduce or distribute.
31
4. Processor Heat sink Module (PHM) Sub-Assemblyfor Factory and Field Replaceable Unit (FRU)
4.5.1 PHM Removal from Socket
Fully unscrew all four heatsink nuts on the PHM. Verify that all four anti-tilt wires are
in the locked position. If there is an interference between the driver bit and antitilt wire this is an indicator
that the anti-tilt wire is not in the correct position.
NOTE: Ensure all Heatsink nuts are fully unscrewed before removing the heatsink.
Position the Anti-Tilt wires into the unlocked position. (inward position)
Instruction Sheet
411-115008 Rev.A
20th Mar’20
