TE Connectivity Confidential & Proprietary. Do not reproduce or distribute.
15
4. Processor Heat sink Module (PHM) Sub-Assembly for Factory and Field Replaceable Unit (FRU)
4.2.3 Processor Carrier Assembly
Using two fingers, while aligning the package with Processor carrier, press down on the Processor carrier
at the opposite end of the TIM break lever until a snap sound is heard.
Using two fingers press down on the Processor carrier at the end of the TIM break lever until a snap sound is heard.
Check the two side snap latches on the carrier and verify that they have latched to the package. If not then press down
on top of the side snap latches until they snap into place.
Instruction Sheet
411-115008 Rev.A
20th Mar’20
