409-32023
Rev
B
27 of 41
Figure 40
3. Use the Down navigation key to navigate to the Terminal field. See Figure 41.
4. Press the Enter key to enter the terminal selection field. See Figure 41. Scroll through the list using
the Up and Down arrow keys. Select a terminal by moving to the desired terminal and pressing the
Enter key. To cancel without selecting, press the Cancel key.
Figure 41
5. When a terminal is selected, the pop-up terminal list will disappear and the Run screen will be
displayed with the selected terminal shown in the terminal box. See Figure 42.
NOTE
Any feeder positional changes saved will be associated with the displayed terminal.
6.
After any terminal changes have been made, the feeder should be "homed”.
To home the feeder, press and
hold the Extend Feed Finger key. The “home position” is the extend
position that places the terminal over the applicator anvil for the next terminator cycle.
NOTE
When using the machine integration with the precision controller, the Komax leadmaker will select the terminal in the precision
controller. When making adjustments of the feed position, make certain that the terminal is selected in the machine.
Run Icon
Part Number and Serial Number in Applicator Box
Terminal Field
Terminal Selection Field
Downloaded From
