409-32023
Rev
B
28 of 41
Figure 42
3.5.
Run Page Data
Run Page Wire Chart
1. Use the Up and Down navigation keys to highlight the Wire Chart pushbutton (shown in Figure 42).
The Wire Chart screen will be displayed with wire gage and crimp height columns. If the host machine
was set to "AMP 3K/5K Coarse Adjust", there will be a coarse adjust column containing the initial
setting that is recommended. See Figure 43.
The Up and Down arrow keys can be used to scroll through the data.
NOTE
The Wire Chart screen is a "view only" screen. Information will not be reset or saved.
2. Press the Enter key. When the Wire Chart pushbutton is activated, a screen similar to the screen
shown in Figure 43 will appear.
Figure 43
Run Page Terminal Data
1. Use the Up and Down navigation keys to highlight the Terminal Data pushbutton (shown in Figure 42).
Run Screen
Wire Chart Screen
Terminal Data Screen (Ref)
Downloaded From