C-M-G
Series
Manual
© TDT GmbH
Chapter 5: Network Configuration
Seite 80 von 136
Command
Description
System Contact
Informative information about the system e.g. the name of the
person, the group or the organisation that is responsible for the
service, maintenance, etc. of the node
5.15.3 Trap Control
Traps are unrequested messages that, are sent from an agent to a management system as soon as
something unforeseen or interesting for the management system happens.
5.15.3.1 SNMP Create New Trap Control
Command
Description
Symbolic Name
Description of the trap control
Destination
Hostname:
Accured trap will be sent to the following host
IP:
Accured trap will be sent to the following IP address
Community
Name of the trap community
Type
SNMPv1 Trap Receiver:
SNMP Server receives SNMP Version 1
traps
SNMPv2 Trap Receiver:
SNMP Server receives SNMP Version 2
traps
SNMPv2 Inform Receiver:
SNMP Server receives SNMP
Version 2 inform traps
Process
Yes:
Activates/deactivates this trap control
5.15.4 (Sub)Agent Configurations
Use this menu to configure the SNMP-Monitoring.
5.15.4.1 Common Settings
Command
Description
Send trap on authentication
failures:
Yes:
The router sends a trap when an invalid authentication has
taken place
No:
The router does not send a trap when an invalid
authentication has taken place
Enable System Monitoring:
Yes:
Activates the sub-agent monitoring
No:
Deactivates the sub-agent monitoring
5.15.4.2 Monitor Running Processes
5.15.4.2.1 SNMP Agent Create Process Monitor
Command
Description
Process:
Name of the process be monitored
Max. running instances:
Maximum number of permitted instances. If no value or the value
‘0‘ is entered, then the permitted instances are endless.
