C-M-G
Series
Manual
© TDT GmbH
Chapter 5: Network Configuration
Seite 78 von 136
Command
Description
Default Index
(optional)
Packets that do not correspond to any defined rules are
processed in the default class. This value defines the default
class.
Set TC-Index
Yes:
This queue rule copies the ToS
– value (Type of Service) of
the packets (DS-value)
5.14.1.2.6 HTB (Hierarchical Token Bucket)
Command
Description
R2Q
The R2Q defines a class, which contains all unclassified packets
5.14.1.2.7 PRIO (Filter)
Command
Description
Number of Bands
Defines a class. The higher the number, the higher the value of
the class
5.14.1.2.8 PRIO (Priomap)
Command
Description
Number of Bands
Defines a class. The higher the number, the higher the value of
the class
5.14.2 Incoming Interfaces
There are also possibilities to control the incoming network traffic with rules. This implementation
basically differs from the others, because the incoming packets do not bottle up at the interface. As a
result a rule for incoming traffic can only be used together with filters and policies.
5.14.2.1 Interface parameters
Command
Description
Interface
Selects the incoming interfaces
Enable Interface
Interface will be activated/deactivated
Attached Interface
Defines on which inteface(s) the new QoS rules should be
activated
The Root Qdisc parameters are equal to chapter
5.14.3 Interface Statistics
Statistics for incomming and outgoing QoS interfaces are listed here.
