C-M-G
Series
Manual
© TDT GmbH
Chapter 5: Network Configuration
Seite 94 von 136
5.19.4 Advanced settings
Command
Description
Enable WDS (4-address
frame) support
Enables Wireless Distribution System (WDS) support for the
Access Point.
This will, for example, be required if the WLAN interface at the
access point and station side are combinded to a bridge with
other interfaces.
Beacon Interval
Defines the interval for the access point to broadcast the SSID to
clients. (Default: 100)
DTIM period
(Delivery Traffic Indication Message) informs clients about next
data packet transmission and interval
Maximum number of
stations
Defines the maximum number of clients. (1 - 2007; Default: 2007)
RTS/CTS threshold
Threshold value to define if and when a (RTS/CTS, Ready to
Send/Clear to Send) handshake signal between router and client
will be sent to avoid hidden station problems. (Default: disabled)
Fragmentation threshold
Threshold for data size forcing data packets to be sent
fragmented. (Default: Disabled)
Basic rate set
Defines the basic transmission rate
5.19.5 WEP related settings
Command
Description
Authentification
Open:
No authentication will be made
Shared:
Authentication will be made using a secret key
Open/Shared:
Both variants can be used on the client side
Key Index
Current number when a number of keys are used
Key Format
Defines the key format
Key
Network key
5.19.6 WPA/WPA2-EAP settings
Command
Description
IEEE 802.1X/EAPOL version
Defines the EAPOL version (Version (Extensible Authentication
Protocol over LAN))
EAP Server
Defines if an external radius (Remote Authentication Dial-In User
Service) server or the routers internal EAP server should be used.
5.19.6.1 Radius Client Settings
Command
Description
Own IP address (used as
NAS-IP)
IP address to identify the NAS request
NAS-Identifier
Name to identify the NAS request
