C-M-G
Series
Manual
© TDT GmbH
Chapter 5: Network Configuration
Seite 58 von 136
5.9.5.2 Condition details
Command
Description
Source address or network
Ignored:
The network source address will be ignored
Equals:
The network source address must correspond to the
following value
Does not equal:
The network source address must be unequal to
the following value
Destination address or
network
Ignored:
The network target address will be ignored
Equals:
The network target address must correspond the
following value
Does not equal:
The network address must be unequal to the
following value
Incoming interface
Ignored:
The incoming network interface will be ignored
Equals:
The incoming network interface must correspond to the
following value
Does not equal:
The incoming network interface must be
unequal to the following value
Outgoing interface
Ignored:
The outgoing network interface will be ignored
Equals:
The outgoing network interface must correspond to the
following value
Does not equal:
The outgoing network interface must be unequal
to the following value
Fragmentation
Ignored:
Fragments of IP addresses will be ignored
Is fragmented:
For fragment of IP packets there is no possibility
to determine their source or target IP and port. Therefore other
conditions do not apply and it it only possible to perform the rule
with this parameter.
Is not fragmented:
When the IP packets are not fragmented, the
rule will be performed.
Network protocol
Ignored:
The protocol will be ignored
Equals:
The protocol must correspond to the following value
Does not equal:
The protocol must be unequal to the following
value
Source TCP or UDP port
Ignored:
The source port will be ignored
Equals:
The source port must correspond to the following value
or range
Does not equal:
The source port must be unequal to the
following value or range
Destination TCP or UDP port Ignored:
The target port will be ignored
Equals:
The target port must correspond to the following value or
range
Does not equal:
The target port must be unequal to the following
value or range
Source and destination
port(s)
Ignored:
The source and target ports will be ignored.
Equals:
The source and target ports must correspond to the
following value or range
Does not equal:
The source and target ports must be unequal to
the following value or range
