TDK-Lambda PH Series, Manual, Page: 29 / 58

PH
PH
B-327
・All specifications are subject to change without notice.
Outline Drawing
【PH50S】
（Package Type: T41）
【PH75S】
（Package Type: T41）
【PH75F】
（Packege Type: T62）
NAME PLATE
See note B
See note C
See note A
See note B
See note C
See note A
NAME PLATE
NOTES
A: Model name, input voltage range, nominal output voltage, maximum output
current, country of manufacture and safety marking (UL, C-UL [LEVEL3], BSI
& CE marking, except 3.3V model) are shown here in accordance with the
specifications.
B: M3 tapped holes 2 for customer chassis mounting (FG). Screws must not pro-
trude into power module by more than 12.7mm. (Back side for heat sink.)
C: Input and output terminal
…
4-
Φ
2
2-
Φ
0.6
NOTES
A: Model name, input voltage range, nominal output voltage, maximum output
current, country of manufacture and safety marking (UL, C-UL [LEVEL3], BSI
& CE marking) are shown here in accordance with the specifications.
B: M3 tapped holes 2 for customer chassis mounting (FG). Screws must not pro-
trude into power module by more than 12.7mm. (Back side for heat sink.)
C: Input and output terminal
…
4-
Φ
2
8-
Φ
0.6
【PH100S】
（Packege Type: T62）
See note B
See note C
See note A
NAME PLATE
NOTES
A: Model name, input voltage range,
nominal output voltage, maximum
output current, country of manufac-
ture and safety marking (UL, C-UL
[LEVEL3], BSI & CE marking) are
shown here in accordance with the
specifications.
B: M3 tapped holes 2 for customer
chassis mounting (FG). Screws
must not protrude into power mod-
ule by more than 12.7mm. (Back
side for heat sink.)
C: Input and output terminal
…
4-
Φ
2
4-
Φ
0.6
【PH150S】
（Packege Type: T72）
See note B
See note C
See note A
NOTES
A: Model name, input voltage range,
nominal output voltage, maximum
output current, country of manufac-
ture and safety marking (UL, C-UL
[LEVEL3], BSI & CE marking) are
shown here in accordance with the
specifications.
B: M3 tapped holes 4 for customer
chassis mounting (FG). Screws
must not protrude into power mod-
ule by more than 12.7mm. (Back
side for heat sink.)
C: Input and output terminal
…
6-
Φ
2
4-
Φ
0.6
PH
50S, 75S, 75F, 100S, 150S
NAME PLATE