14
Speaking
After accepting a call, the indication
established voice connection
is
displayed (fig. 16).
Fig. 16: established voice connection
… jogwheel module AMI10410
Standby mode
standard
Fig. 17: standby mode Standard
Selecting a name
select initial character:
►
Turn the jogwheel. The resident is displayed and the first name is
marked (fig. 18).
►
Alternatively press the
ABC button
at the jogwheel module. All
initial characters, that are available in the list, are displayed.
Browse through the initial character:
►
Turn the jogwheel until the required initial character is displayed.
►
Confirm your selection with the smart key
or
. The resi-
dent list is displayed and the first name with the required initial
character is marked.
Browsing through the resident list:
►
Turn the jogwheel until the required name is marked.
The list of available initial characters is only displayed, if the
chapter pre-selection resident list
was activated via the con-
figuration software configo™. Otherwise the resident list is
displayed immediately.
Fig. 18: resident list
Fig. 19: list of available initial characters
Fig. 20: resident list
Speaking
After accepting a call, the indication
established voice connection
is
displayed (fig. 23).
Fig. 21: established voice connection