12
Configuration options
function
configo
TM
as of version 1.8.x.x
create resident list (allocation of the 1st and 2nd indoor station to name and number)
x
Determine the AS address
x
activate the temperature indication
x
switch over the temperature specification to unit °F (Fahrenheit)
x
activate the AD2 mode
b)
x
activate FBO1100 direct dial
b)
x
activate chapter resident list pre-selection
b)
x
select mode backlight (always OFF, always ON, automatic mode
a)
, depending on the brightness)
x
select start screen (TCS logo, temperature, none)
x
a) automatic
mode:
The backlight is switched off in standby mode. The user can activate it at the front-door station ans it is switched off automatically after 30 sec.
The backlight is activated by one of the following actions:
pressing a smart key at the display module
pressing a button at the codelock module (operation mode keyboard)
operating the jogwheel module
pressing a button at the bell button module
b) Explanations:
AD2 mode is activated: the name of the resident is displayed. Not activated: only the flat number is displayed.
FBO1100 direct dial is activated: a telephone can be called directly (call number with max. 10 digits in combination with AMI11603) activate
pre-selection via initial character: when pressing a smart key, a list of available initial characters is displayed from which you can get to the total
list of the selected character (recommended only for extensive resident data bases).