11
Standby mode
10 sec. after switching on the device, the start screen appears. The
device is in standby mode.
In delivery state the TCS logo is displayed.
Standard
(optionally with jogwheel module AMI10410)
Basic
(only with codelock module)
Extended
(with codelock module and jogwheel module)
Fig. 7: standby mode Standard
Fig. 8: standby mode Basic
Fig. 9: standby mode Extended
Configuration
The display module can be configured exclusively with the configuration software configo™.
The module cannot be configured manually via the buttons as well as via the Service Device TCSK.
The configuration software configo™ can be used also by the end user, e.g. the property management to update
the name list.
For the configuration you need the maintenance package FBI1210-0 (or FBI1200-0).
All configuration data and the resident data base are stored on the EEPROM.
Additionally these data are transferred automatically to the EEPROM after each configuration. The EEPROM can
be removed if necessary, without functional impairment.
Factory settings
The device is equipped with an EEPROM. Within the EEPROM, the following device settings are stored ex works:
mode backlight
automatic operation
1)
start screen
TCS logo
data base
no data sets
temperature sensor
a)
deactivated
unit of temperature
°C (Celsius)
indication in AD2 mode
activated
FBO1100 direct dial
deactivated
activate pre-selection via initial character
deactivated
a) temperature
sensor:
A temperature sensor, flush-mount, single, FBS2100-0600 can be used.
Preset times
timeout for backlight in automatic mode
30 sec
error detection "button stucks" (press the button longer than 25 sec)
25 sec