13
Operation
Calling / speaking to residents via
… smart keys (display module)
Standby mode
standard
Fig. 10: standby mode Standard
Selecting a name
Select initial character:
►
Press one of the smart keys
. All initial characters, that are
available in the list, are displayed.
An empty resident data base is displayed with
……..
.
Browse through the initial character:
►
Press the smart key
repeatedly until the required initial char-
acter is marked (fig. 12).
►
Confirm the selection with the smart key
. The resident list is
displayed. The first name with the selected initial character is
marked (fig. 13).
The list of available initial characters is only displayed, if the
chapter pre-selection resident list
was activated via the con-
figuration software configo™. Otherwise the resident list is
displayed immediately.
Browse through the resident list:
►
Press the smart key
to browse downwards resp. the smart
key
to browse upwards.
Fig. 11: select initial character
Fig. 12: browse
Fig. 13: resident list
Calling a resident
►
Press the smart key
. The selected resident is called and the
name is displayed (fig. 14).
If the telephone does not respond resp. the front-door station
receives no acknowledgement, the indication appears (fig.
15).
Fig. 14: call resident
Fig. 15: telephone does not respond