TC Electronic M5000, User Manual, Page: 86 / 203

ALGORITHMS
M5DYN
Rev 1.1 Page 15
ATT -40 - 0.0 dB The attenuation control sets the high
frequency rolloff determined by HICUT.
SPREAD/DIFFTYPE 0-1 These two parameters work very close
together. Here is a brief description of
the two basic settings. When both
parameters are set to 1, the REVCORE-1
will be very fast in its build up, and
concentrated in the center. When set to 0
the tail will be a little broader. When set
to either 0, 1 or 1, 0 the REVCORE-1
will displace the center a little to one of
the sides.
RWIDTH 0 - 100 % Sets the apparent stereo width of the
reverberating part of the algorithm. At
'0', the reverb tail will appear to be
coming mainly from the center, whereas
with RWIDTH set to '100' the L/R
reverberators are inde-pendent.