TC Electronic M5000, User Manual, Page: 32 / 203

ALGORITHMS
M5ALGOIN
Rev 1.4 Page 10
Increasing the predelay will change the
apparent position and, to some degree,
the size of the room.
Max predelay before loosing taps (std. memory)
@48KHz samplerate
Size mS Size mS Size mS
Hall 0.50 112.4 1 40.7 1.28 0.0
Fan 0.50 146.8 1 109.5 2.47 0.0
Prism 0.50 135.4 1 86.7 1.89 0.0
H.Shoe 0.50 116.2 1 48.3 1.36 0.0
Club 0.50 133.4 1 82.7 1.81 0.0
Small 0.50 141.2 1 98.2 2.14 0.0
@44.1KHz samplerate
Size mS Size mS Size mS
Hall 0.50 118.2 1 52.3 1.40 0.0
Fan 0.50 149.8 1 115.5 2.69 0.0
Prism 0.50 139.4 1 94.6 2.06 0.0
H.Shoe 0.50 121.7 1 59.3 1.48 0.0
Club 0.50 137.5 1 90.9 1.98 0.0
Small 0.50 144.7 1 105.2 2.33 0.0
Max predelay before loosing taps (w.option 'himem' memory, order# 5IRAM-1)
@48KHz samplerate
Size mS Size mS Size mS
Hall 0.50 459.5 1 393.6 4.00 0.0
Fan 0.50 491.2 1 456.9 4.00 251.2
Prism 0.50 480.7 1 436.0 4.00 167.6
H.Shoe 0.50 463.0 1 400.6 4.00 26.2
Club 0.50 478.8 1 432.2 4.00 152.7
Small 0.50 486.0 1 446.6 4.00 209.9
@44.1KHz samplerate
Size mS Size mS Size mS
Hall 0.50 500.2 1 428.5 4.00 0.0
Fan 0.50 534.6 1 497.3 4.00 273.4
Prism 0.50 523.2 1 474.5 4.00 182.4
H.Shoe 0.50 504.0 1 436.1 4.00 28.6
Club 0.50 521.2 1 470.5 4.00 166.2
Small 0.50 529.0 1 486.0 4.00 228.5
table 2.
REVFEED 0.0 - 100.0 mS Sets the time before the reverberating
0.0 - 300.0 mS 4 part of the signal starts to build up,
relative to the early reflections PREDLY.
HICUT 500 Hz - flat High cut filter, shelving type. Provides
an overall reverb high frequency rolloff
(6 dB per octave) that is well suited to
make a warmer sound. Sets the cut-off
4
Only if idx RAM mounted is 64K. Check your index ram in the CONFIG menu under UTILITY.