TC Electronic M5000, User Manual, Page: 82 / 203

ALGORITHMS
M5DYN
Rev 1.1 Page 11
REVCORE-1 M5000
The REVCORE-1 is the first in a row of new TC Reverb algorithms based on the TC CORE 1 .
This REVCORE-1 algo was developed specifically to perform small rooms. As a result of
this, the Reverb buildup is fast, just like in smaller Rooms. Especially with percussive
materials, this responsiveness is quite useful. Film and post production-work often requires
use of smaller Rooms. Although the early reflection patterns bears names equivalent to the
names used in Reverb 1&2 algos, the patterns are modified for use with smaller spaces.
Here is a description of the parameters dedicated to the REVCORE-1 algorithm.
EDIT PARAMETERS:
MIX 0 - 100 % Sets the mix between dry and wet signal.
100 % = effect signal only. Mix can be
set to 100 % globally in the G-LEVELS-
menu under UTILITY. Set MIXMODE
WET=MAX and all dry signals are
"killed" regardless of preset mix settings.
INLEV off - 0.0 dB. Sets the level of the input to the reverb in
0.5 dB steps. The function of the control
is to maximize dynamic range. Please
note that this control is positioned after
the input PPM meter, and will not affect
the input PPM reading, also if using an
analog input, make the analog input
adjustment in the G-LEVELS-menu
1
Co-efficient Optimized Room Emulation