TC Electronic G-Force, User Manual

Page: 9 / 60

OVERALL BYPASS
The Bypass key in the upper
left corner is the overall
bypass. With this key you can
bypass all effects in the
G-Force simultaneously.
Note: If the Killdry function (in
the I/O Setup Audio menu) is
active, the G-Force will be
muted. This means that no
sound will pass through.
TUNER
Press this key to enter Tuner
mode.
TEMPO
Tap the global tempo using
the Tempo key. Note: this
may affect the current preset.
Pressing the Tempo key will
enable the Tempo pop-up
menu. This menu will
disappear after a few
seconds.
The Tempo key will indicate
the global tempo by blinking.
ARROW KEYS
In many of the displays you can select
different menus by pressing the Arrow
keys, i.e. in the Effects display you can
select between Mix, Edit, Routing, and
Layout.
THE PARAMETER WHEEL
Use the Parameter wheel to change
position of the cursor in the display
THE VALUE WHEEL
Use the Value wheel to change the
values of a parameter.
ENTER, EXIT
The Enter key is used to confirm actions,
or for accessing into a block. The Enter
key will blink when the G-Force needs
you to confirm. The Exit key is normally
used to exit a menu, or to cancel an
action.
9
EFFECT BYPASS
The nine effect keys are
dedicated to bypassing
any of the eight effects
and the Noise Gate.
These keys can bypass
an effect block at any
time, no matter what
display you are working in.
When you are in the
Effects Edit display,
double click for fast
access to the Edit
parameter menu