TBB MPPT SP60-150, User Manual

Page: 22 / 48

SP60/SP80 User Manual V1.3
TBB Power Co.,Ltd 20
4.4.1 Preparation

Please find in chapter 3.4 of the size of the SP charge controller

Please choose a flat surface and with 4xM6 supplied to install

Before mounting, please loose the screws on front panel to access the connection
compartment.

Please install four feet supplied in the accessory pack on side of the charge controller.
Fig4-2 Illustration of installation
4.4.2 Mounting the SP charge controller

The SP need to be installed vertically

Please place the SP on your preference location and mark the location of four feet.

Screw the four screw on the wall, leaving about 6mm (1/4”).

Hanging the SP on the four screws and screw tight the four screws afterwards.
Please double check the SP was securely mounted on the wall.