TBB power Kinergier Pro Series, Manual

Page: 6 / 48

Kinergier Pro User Manual
1
1. General Safety Instruction
1.1 Safety instruction
As dangerous voltages and high temperature exist within the Kinergier Pro Inverter Charger, only
qualified and authorized maintenance personnel are permitted to open and repair it. Please make
sure Kinergier Pro Inverter Charger is turned off before opening and repairing it.
This manual contains information concerning the installation and operation of the Kinergier Pro
Inverter Charger. All relevant parts of the manual should be read prior to commencing the
installation. Please follow the local stipulation meantime.
Any operation against safety requirement or against design, manufacture, safety standard are out
of the manufacturer warranty.
1.2 General precaution

DO NOT expose to dust, rain, snow or liquids of any type. It is designed for indoor use. DO
NOT block off ventilation, otherwise the Kinergier Pro Inverter Charger would be
overheating.

To avoid fire and electric shock, make sure all cables selected with right gauge and being
connected well. Smaller diameter and broken cable are not allowed to use.

Please do not put any inflammable goods near to inverter.

NEVER place unit directly above batteries because gases from a battery will corrode and
damage Kinergier Pro Inverter Charger.

DO NOT place battery over Kinergier Pro Inverter Charger.
1.3 Precaution regarding battery operation

Use plenty of fresh water to clean in case battery acid contacts skin, clothing, or eyes and
consult with doctor as soon as possible.

The battery may generate flammable gas during charging. NEVER smoke or allow a spark
or flame in vicinity of battery.

DO NOT put the metal tool on the battery because spark and short circuit might lead to
explosion.

REMOVE all personal metal items such as rings, bracelets, necklaces, and watches while
working with batteries. Batteries can cause high enough short-circuit current to make metal
melt, and could cause severe burns.