TBB power Kinergier Pro Series, Manual

Page: 44 / 48

Kinergier Pro User Manual
39
6.2 Warning code
6.2.1 Inverter Warning
No. Warning Code Description Solution
001 U_BAT_OV Battery is over-voltage Check the battery voltage.
002 U_BAT_LV Battery is under-voltage Check the battery voltage.
003 U_BAT_LV_Fault
Battery is under-voltage
protection
Check the battery voltage.
004 Overload Overload warning Reduce the load.
005 NTC_HS_Fault Heat sink NTC fails
Power off the inverter and check the
internal NTC connection. Contact
your installer if the fault still exists.
006 NTC_TX_Fault Transformer NTC fails
007 T_BAT_OT
Battery temperature is too
high
Check battery sensor connection;
Check battery temperature; Check
battery connection
008 Fan_Fault Fan is abnormal
1.Check whether the fan is blocked.
2.Open the case, check the fan
connection. Contact your installer if
the fault still exists.
009 ParConnect_Err
Parallel connect is
abnormal
Check the connection of parallel
communication cable.
010 ParComm_Err
CAN communication is
abnormal
Check the parallel parameter setting.
011 Par_ID_Conflict Parallel address conflicts
Check the parallel parameter setting
(ID address)
012 Para_Conflict Parameters do not match
Check the parameter setting or
trigger Parameter Sync.
013 Par_SyncTimeOut
Synchronization is
overtime
014 ModeSet_Mismatch
The system mode and
parameter setting do not
match
Check the parameter setting (Lithium
battery, AC Couple)
015 Out_Circuit_Err
The AC output of the
Parallel system or
three-phase system is
abnormal
Check the output wire connection
016 Comm_HMI_Err
Internal communication of
LCD is abnormal
Open the case, check the LCD wire
connection. Contact your installer if
the fault still exists.
020 ACin_OV AC input is over-voltage
Check the AC input voltage and
connection
021 ACin_LV AC input is under-voltage
022 ACin_OF AC input is over-frequency
023 ACin_LF
AC input is
under-frequency