TBB power Kinergier Pro Series, Manual

Page: 16 / 48

Kinergier Pro User Manual
11
Over temperature protection
When the internal temperature is too high, Kinergier Pro will enter into the over-temperature
protection. After the internal temperature returns to normal, it can automatically resume normal
operation.
Short circuit protection
The equipment will automatically shut down when the AC output is shorted and needs to be
manually activated.
Battery over temperature protection
During the charging, the equipment will continuously monitor the battery temperature. When the
battery temperature is too high, the equipment will automatically reduce the charging current.
When the battery is severely heated, the charger will automatically turn off to protect the battery.
Battery low voltage protection
To prevent the permanent damage caused by the over discharge of battery, the equipment will
automatically cut off the output according to the low voltage protection point set by the user.
2.3.10 Communication
Dry contact input
Kinergier Pro is equipped with two dry contact inputs for remote on/off and EPO control.
Dry contact output
Kinergier Pro is equipped with two NO/NC relay type dry contact outputs, the user can set specific
functions through the LCD. Below is the default setting.

Relay1: The relay is closed when the battery is under voltage.

Relya2: The relay is closed when a fault or overload occurs.
RS485
Equipped with two RS485 interfaces.
CAN
Equipped with a CAN interface.