TBB power Kinergier Pro Series, Manual

Page: 25 / 48

Kinergier Pro User Manual
20
The following chapters explain how to configure the parameters through combination of switches.

Scroll to the “Parameter Set” screen and press “Enter” to confirm.

This menu was protected by password. The default password is “1000” and it can be changed
by clients.

Choose the screen for the parameters you want to set.

Combined four buttons, you can achieve all configurations in this chapter. Please find the
following functions of each button during configuration.
1. Press <UP> and <DOWN> button to choose specific number you want to program.
2. Press <Enter> button to activate the entering.
3. Press <UP> and <Down> button to choose digit you want to put.
4. Press <Enter> button to confirm this digit.
5. After enter all four digits, please press <Back> button and <Enter> button to confirm.
Begin
Press the , the cursor appears on the right side bit of the parameter.
Press the to Change the bit of parameter
Press the , the corresponding bit flashes, press the to change the value
Adjust the bit, press the , then adjust the other numbers
Press the and a save prompt appears.
setting
completed?
Save?
Waiting…...
Successful
setting?
successful setting prompt appears.
The parameter does not change,
returns to the original display, and
return to the begin and set again.
A failure Setting prompt appears.
Go to the next setting item
Yes
No
Yes
Yes
No
No
Yes