6
DISPENSER ASSEMBLY
Note:
Before assembling the Dispenser, it is
recommended that all parts be cleaned, sanitized, dry,
and handled in a sanitary manner. Refer to the Cleaning
Procedures (page 9) for more information.
Figure-5 Fry Guide
Install the fry guide under the cabinet outlet, sliding it
onto the mounting rails.
Figure-6 Flap Door
Figure-7 Pivot Block
Figure-8 Accumulator Housing
Open the cabinet door. Install the flap door by slipping it
under the accumulator doors so the green arrows are
visible from inside the cabinet. Seat the flap door pivot
pin into the plastic pivot blocks, as shown above. Install
the accumulator housing on the accumulator doors.
Summary of Contents for McDonald's R200
Page 50: ...48 ELECTRICAL DIAGRAM Figure 33 ...
Page 56: ...089363 MCD ...
