28
CALIBRATIONS AND ADJUSTMENTS
Scale Calibration
The RAM R200 Frozen Food Dispenser has a scale
which weighs and dispenses frozen fries. This scale may
require calibration periodically.
1. Open the cabinet door and remove the hopper from
the Dispenser.
Note:
The accumulator housing should remain in place
on the accumulator doors.
Calibration of the scales is performed using the operator
panel on the front of the Dispenser.
2. Press the Menu button until the display reads User
Menu. Use the Up or Down arrow buttons to change
the User function to Calibrate, then press the OK
button. The display will change to
Place Basket.
3. Place an empty fry basket under the accumulator
doors. Lift the front of the basket slightly and slide the
basket forward against the basket sensor. The
accumulator doors will open and close to dispense
any contents into the basket to ensure the
accumulator housing is empty before zeroing the
scale.
4. The display will change to
Zeroing Scale
. The scale
now tares (zeros) itself automatically.
5. After it achieves a stable tare, the display will change
to
Place 1.0 lb
, or
Place 450g
if set to metric units.
Place a 1 lb. (454 g) reference weight on the
accumulator doors. (Note: Four frozen 1/4-lb. patties
can be used in place of a 1 lb. reference weight.)
6. Once the scale stabilizes, the display will change to
Place 2.0 lb
, or
Place 900g
if set to metric units.
Place an additional 1 lb. (454 g) weight on the
accumulator doors for a total of 2 lb. (908 g) on the
accumulator doors.
7. After the scale stabilizes, the display will change to
Remove Weights
. Remove the reference weight(s)
from the accumulator doors and reinstall the hopper.
The Dispenser will return to normal operation with no
basket size selected.
Set Configuration and Service Passwords
A password can be set to restrict unauthorized access to
both the Configuration and Service Function menus.
Once set, the password will need to be entered to gain
access to restricted menus. Take care to remember your
password or write it down and keep it in a safe location.
A Configuration or Service password can be set and/or
changed from both the Configuration Function menu
(page 28) or the Service Function menu (page 28) using
the operator panel on the front of the Dispenser.
To access the Configuration Function menu to set or
change the password, press the Menu button to access
the Configuration menu. Use the Up or Down arrow
buttons until
Set Password
is displayed, then press the
OK button. To access the Service Function menu to set
or change the password, press the Menu button until the
Service menu is displayed then press the OK button to
access the Service menu. Use the Up or Down arrow
buttons until
Set Password
is displayed, then press the
OK button.
The display will change to read
Set Password
and
"-------- ". Enter a password using the basket load size
buttons and Up and Down arrow buttons. When finished,
press the OK button. (Any sequence of the basket size
buttons and Up and Down arrow buttons can be used to
create a password.)
The display now reads Repeat Password and “--------“.
Repeat the password sequence then press OK to save
the password and exit to the Configuration or Service
menu.
To cancel a set password, access the
Set Password
function and press the OK button twice without entering a
password.
Target Weight Adjustment
Each basket size button’s target weight can be
individually customized.
Default settings are:
•
Small load = 0.50 lb. (227 g)
•
Medium load = 1.0 lb. (454 g)
•
Large load = 1.5 lb. (680 g)
Note:
Adjustments to the target weight for basket size
buttons are performed from the Configuration Function
menu (page 28)
using the operator panel on the front of
the Dispenser, and may require a manager’s password to
access the menu.
To access the Configuration Function menu and
customize the target weights for the basket size buttons,
press the Menu button to display the Configuration menu.
If a password is required the display will show “___”
below
Config Menu
. Enter the manager’s password,
then press the OK button.
Press the Up or Down arrow buttons until
Set Targets
is
displayed. Press the OK button to enter function.
The display will change to
Set Targets
with a flashing
Summary of Contents for McDonald's R200
Page 50: ...48 ELECTRICAL DIAGRAM Figure 33 ...
Page 56: ...089363 MCD ...
