Taylor C801, Operating Instructions Manual

Page: 28 / 70

24 C801/C801R/F802/P802/C803/C803R/C804 Important: To the Operator
The following symbols are used on the cook and
serve displays.
= 4 oz.
= 2 oz.
= Eggs
= Sausage
= Hot Meat
= Chicken
= Red Chef Hat
Master Power Switch
The Double-Sided Grill (DSG) is equipped with a
master power switch, which is only used when the
grill needs to be quickly shut down.
In this situation, pulling out on the switch
immediately removes power from the control
circuits. Two red lights illuminate to indicate that the
power to both power circuits has been interrupted.
There is a one minute memory backup that allows
the grill to maintain all timing control states in the
event of a power loss. Once this backup period
expires, all timing control functions are lost. In this
situation, any cooked meat in the staging section
and any meat in the cooking section must be
removed from the grill. The cooked meat from the
staging section is placed in the chili meat pan and
the partially cooked meat is discarded.
To restart the grill, push in on the master power
switch to restore power to the controls. If the back
up memory has expired, turn on the grill per
standard procedures. When the switch is pushed in,
the red lights will extinguish.
The master power switch is located on the Line 2
side of the grill, beneath the node panel.
Grill Operation
Each grill has a lower cook surface. Excluding the
Model P802, they also have two or more upper
platens. One or more of the upper platens is
adjustable. Adjustable platens can be adjusted to
cook either 2 oz. or 4 oz. patties.
To change the product size on the adjustable platen,
shift the lever on the front of the platen up or down
so that the display shows the desired patty size.
Place the lever in the up position for 4 oz. patties
and in the down position for 2 oz. patties.
Figure 21
A minimum of one patty and a maximum of eight 4
oz. or ten 2 oz. patties may be cooked under one
grill platen.