Taylor C709, Owner'S Manual

Page: 24 / 68

5-2
USER INTERFACE
Models C709 & C717
User Interface
5
Symbol Definitions
To better communicate in the international arena,
symbols have replaced words on many of our operator
switches, function, and fault indicators. Your Taylor
machine is designed with these international symbols.
The following chart identifies the symbol definitions used
on the machine.
= Select
= Up Arrow
=Down Arrow
= Auto
= Heat Cycle
= WASH (Model C709)
= Wash (Model C717)
= Mix Low
=Mix Out
=Menu Display
=Standby
Power Switch
When placed in the ON position, the power switch allows
control panel operation.
Fluorescent Display
The fluorescent display is on the front control panel.
During normal operation the display is blank. The display
is used to show menu options and notifies the operator if
a fault is detected. On international models, the display
will indicate the temperature of the mix in the hopper.
Indicator Lights
Mix Low— When the Mix Low key is illuminated,
the mix hopper has a low supply of mix and should be
refilled as soon as possible.
Mix Out— When the Mix Out key is illuminated,
the mix hopper has been almost completely exhausted
and has an insufficient supply of mix to operate the
machine. At this time, the Auto mode is locked out and
the machine will be placed in the Standby mode. To
restart the machine, add mix to the mix hopper and press
the Auto key . The machine will automatically begin
operation.
Heat Mode— When the Heat mode key is
illuminated, the freezer is in the process of a Heat cycle.
If enabled, the Heat key can be pressed to start a Heat
cycle. If disabled, the Heat key is inoperable. By default,
the Heat key is enabled.
Brush-Clean Counter— When the Brush-Clean Counter
display has counted down to “1”, the machine must be
disassembled and brush-cleaned within 24 hours.
Wash Key
The Wash key (Model C709) or (Model
C717) will illuminate when it is pressed. This indicates
beater motor operation. Standby or Auto modes must be
canceled first to activate the Wash mode.
Auto Key
The Auto key will illuminate when it is pressed.
This indicates that the machine has been activated. In
the Auto mode, Wash or Standby functions are
automatically canceled.
Note: An indicating light will illuminate and an audible
tone will sound whenever a mode of operation has been
selected. To cancel any function, press the key again.
The light and the mode of operation will shut off.