Section 10
10-1
Models 358 and 359
Limited Warranty on Equipment
10
Limited Warranty on Equipment
TAYLOR COMPANY LIMITED WARRANTY ON FREEZERS
Taylor Company is pleased to provide this limited warranty on new Taylor-branded freezer equipment available from
Taylor to the market generally (the “Product”) to the original purchaser only.
LIMITED WARRANTY
Taylor warrants the Product against failure due to defect in materials or workmanship under normal use and service as
follows. All warranty periods begin on the date of original Product installation. If a part fails due to defect during the
applicable warranty period, Taylor, through an authorized Taylor distributor or service agency, will provide a new or
remanufactured part, at Taylor’s option, to replace the failed defective part at no charge for the part. Except as
otherwise stated herein, these are Taylor’s exclusive obligations under this limited warranty for a Product failure. This
limited warranty is subject to all provisions, conditions, limitations, and exclusions listed below and on the reverse
(if any) of this document.
LIMITED WARRANTY CONDITIONS
1. If the date of original installation of the Product cannot be verified, then the limited warranty period begins ninety
(90) days from the date of Product manufacture (as indicated by the Product serial number). Proof of purchase may
be required at time of service.
2. This limited warranty is valid only if the Product is installed and all required service work on the Product is
performed by an authorized Taylor distributor or service agency, and only if genuine, new Taylor parts are used.
3. Installation, use, care, and maintenance must be normal and in accordance with all instructions contained in the
Taylor Operator’s Manual.
4. Defective parts must be returned to the authorized Taylor distributor or service agency for credit.
5. The use of any refrigerant other than that specified on the Product’s data label will void this limited warranty.
LIMITED WARRANTY EXCEPTIONS
This limited warranty does
not
cover:
1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of
defective parts, replacement parts, or new Products.
2. Normal maintenance, cleaning, and lubrication as outlined in the Taylor Operator’s Manual, including cleaning of
condensers.
3. Replacement of wear items designated as Class “000” parts in the Taylor Operator’s Manual.
4. External hoses, electrical power supplies, and machine grounding.
Product
Part
Limited Warranty Period
Soft Serve
Insulated shell assembly
Five (5) years
Frozen Yogurt
Shakes
Refrigeration compressor
(except service valve)
Five (5) years
Smoothies
Beater motors
Two (2) years
Frozen Beverage
Beater drive gear
Two (2) years
Batch Desserts
Printed circuit boards and Softech controls
beginning with serial number H8024200
Two (2) years
Parts not otherwise listed in this table or
excluded below
One (1) years
