34
Universal Smith Machine
Step 10:
Assembly of the Shields, Part 2
1. Attach six hooks (60) to the back link tubes (5) with one washer (17) and one nut (16) each.
Tighten the nuts and cap with one plastic cover (14) each.
L
NOTICE
The board (85) must be attached from the inside. Please refer to figure B for a more detailed
overview and order of the components.
2. First attach the board (85) loosely to the rear struts of the left and right frames (3 & 2) with a total
of four bolts (86) and four washers (17). Then tighten und cap each bolt connection with one
plastic cover (14).
Summary of Contents for Universal Smith Machine
