Taurus Universal Smith Machine, Assembly And Operating Instructions Manual

Page: 42 / 60

29
Remove selector rod-49 and shield-58, fi x selector rod with barbell holder-88
42
Universal Smith Machine
Step 15: Subsequent Replacement of the Pulley Holders
It is possible to replace the pulley holders connected to the weight stacks at a later stage.
1. If already attached, first remove the shields (58) by loosening all bolts, washers and nuts.
⚠
CAUTION
Make sure to have a second person holding the cable while performing the next steps.
2. Remove the pulley attached to the pulley holder that you want to exchange by loosening the
bolts, washers and nuts.
3. Unscrew the pulley holder from the threaded end of the selector rod.
4. Screw the desired pulley holder into the threaded end of the selector rod.
5. Place the cable under the previously removed pulley and attach the pulley to the pulley holder
with the same bolts, washers and nuts.
6. If needed, adjust the cable.
7. If you have installed the regular pulley holder, you can now attach the shields (58), see assembly
step 9 for further instructions.