Taurus Universal Smith Machine, Assembly And Operating Instructions Manual

Page: 32 / 60

Assembly step 6
18
84
9
10
11
58
14
84
84
No. Descrip � on Note Qty.
9 hexagon bolt M10x70 4
10 lock nut M10 4
11 big washer Φ 10 24
14 plas � c cover 34
16 lock nut M8 6
17 washer Φ 8 10
58 shield 2
59 barbell plate holder 4
60 hook 6
84 hexagon bolt M10x20 16
85 board 1
86 hexagon bolt M8x20 4
87 spring collar 4
11
14
11
10
9
14
32
Universal Smith Machine
Step 9: Assembly of the Shields, Part 1
࣑ ATTENTION
+ If you have installed the selector rod with barbell holders (88), the shields (58) cannot be
installed.
+ The shields (58) must partly be attached from the inside of the shields (58). Please refer to
figure A for a more detailed overview and order of the components.
+ The barbell plate holders (59) must be attached together with the shields (58) in the first and
fourth hole from the top.
+ Loosely attach the shields (58). Tighten only when all bolt connections are attached, then
cap with plastic covers (14).
1. Insert two barbell plate holders (59) into the rear strut of the right frame (2).
2. Attach one shield (58) to the front and rear struts of the right frame (2) with two types of bolt
connection:
+ Eight bolts (84), eight washers (11) and eight plastic covers (14). Make sure that the
barbell plate holders (59) are connected with the bolt connection in the first and fourth
hole.
+ Two bolts (9), four washers (11), two nuts (10) and four plastic covers (14). Make sure to
use these bolt connections in the second and third hole.
3. Slide one spring collar (87) onto each barbell plate holder (59).
4. Repeat the process on the left side.
Fig. A
Instructions for Selector Rod with Barbell Holders
1. Insert the barbell plate holders (59) into the rear
struts of the left and right frame (3 & 2).
2. Attach the barbell plate holders (59) to the left and
right frame (3 & 2) with one bolt (9), two washers
(11) and one nut (10) each. Tighten and cap with
two plastic covers (14) each.
3. Slide one spring collar (87) onto each barbell plate
holder (59).