Taurus T9.5, Assembly And Operating Instructions Manual, Page: 22 / 60

T9.5
22
Step 5: Attaching the safety key
The operation of the treadmill is only possible if the
safety key was properly inserted at the contact point
from the cockpit. The treadmill will automatically stop
if the safety key is no longer on the contact point.
Before training, make sure that the string of the safety
key is connected to your clothing with the clip. If you
want to stop the treadmill quickly, can no longer
handle the speed or a different emergency occurs,
remove the safety key from the cockpit with the help of the string. In the case of a fall,
the safety key will be removed from the cockpit independently due to the connection
to your clothing. Make sure that the clip is attached firmly to your clothing so that it
cannot be removed by a simple pull. It is not possible to operate the treadmill without
a properly attached safety key. If the safety key is pulled from the cockpit during
training, the treadmill will stop automatically. The incline remains in the set position
and will lower first once the safety key has been connected again.
Energy saving mode:
As soon as the treadmill does not move for four minutes, the
energy saving mode will be activated automatically and the equipment will not show
anything.
Warning: If you would like to use the treadmill, please remove the safety magnets
(1-1) and insert them again (2-1) in order to put the treadmill back into the start
/ standby mode.