Taurus T9.5, Assembly And Operating Instructions Manual

Page: 20 / 60

T9.5
20
Step 1: Assembly of the bottle holder
Place the bottle holder (I) on the inside of
the right upright side frame (D) and screw
it in with the screws (d).
Step 2: Assembly of the upright side frame
Guide the control cable that comes out of
the base frame through the left side frame
(C) from the bottom to the top. In order to
make this step easier for you, a wire was
already led through the side frame (C),
which is mounted on the upper and lower
end of the side frame. Loosen the wire on
the lower end and attach the control cable
to it. Now pull it upwards with the help of
the wire. In order to prevent the control
cable from sliding down, mount it in the
upper area of the side frame (C) with the
wire. Now plug the left side frame (C) into
the left adapter of the base frame (B) and
mount it with the screws (c). Then proceed
exactly the same for the right upright side
frame (D). Once you have tightened all
screws (a), press the cover caps (f) onto
the heads of the screws.
3.2 Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
I
D
d
C
D
B
c
f
f
a